MP4 STE Loading

Case : Mp4 STE Loading, with
Specification : 1st bootloader = Sigmatel; 2nd bootloader = hynix 1GB; and board = Szeeway S-779A-070528

Solution :

1. Format with low level format.
2. Make partition or format again with management windows.

If you have a problem with the firmware & will upgrade/repair, I had to upload the backup firmware (be carrefull some partition can be null information) and the firmware extractornya for bckup your corrupt firmware.

Huawei E220 Modem Not Connect With Computer

If you have experience with your Huawei E220 modem not detected computer or die, try this methode.

Try to up-down USB Cabel in the connector. If sometime modem connect & it sometime not connected with upur compoter, probably your USB connector in trouble. If so, the steps need to be done :

1. Dissamble the modem. Put off the plastik in the middle of top modem. With cutter or anything else.
2. Dislog 1 piece of the screw
3. Separate two of part its casing wih your finger nail or anything else.
4. Dislog again 4 pieces of screws
5. Resolder againt the foots of the connector. To help your job easyly, you can use flux if you have it.
6. Use solder in good condition (sharp & have heat enough). If you haven't give enough heat, it lead foots of connector can rise from PCB. I found this at monitor.
7. If you have done what i said in the top, try it! If you found same problem, do same step until the problem resolved. But if you can't finish, maybe you have try to change to connector with the new ones. Maybe the problem in the path of connector.You can get the connector from mpx player. But if you use handphone usb connector (like motorola), you must cut the foots of connector until you find same lenght.
8. Finish.
   

I hope this info quite helpfull for you.

Make USB Flash Disk Windows

That need be prepared to make USB flash disk Windows.
Flash Disk bootable.
Steps make USB flash disk windows:

1. Download these : (1) http://www.ziddu.com/download/3232393/usb_prep8_dotexe.org.zip.html ; (2) http://www.ziddu.com/download/3232419/PeToUSB_3.0.0.7_dotexe.org.zip.html
2. Extract 2 files Ekstrak those file with winzip/winrar in one folder.
3. Connect the flash disk to the computer. Remember the directory of the flash disk.
4. Enter the windows CD. If the automatic instalation of windows is running, abort instalation.
5. Log in to the folder that contains extraction of 2 files in the step 2. Then, run "usb_prep8.bat”
6. After that, the command prompt appear until command pres any key to continue. Please, press the button are in order confirmation. Don't close the command prompt windows. Just, lets open.
   
7. In the monitor PEtoUSB window will appear & asking you to format the flash disk. Don't change the setting. Just direct start button.
8. Then, confirm it according that you need.
9. If finish you are finnished, close PEtoUSB window until in the monitor show the options from 0 to 5.
10. Select option 1 to choose instalation source file, than copy to the flash disk. Select the optical drive where existing windows xp in it. Or, if the windows xp has been store in the hardisk, navigate to the folder that you save windows files.
11. Option 3 to determine the directory where the flash disk. If the F drive, type F then press enter.
12. Option 4 to start making module instalation will be copied to the flash disk automatically. Answer Y/Yes/Oke to all confirmation appear.
13. Finish. Your flash disk ready to use install windows.
    

Before installation windows, be sure your BIOS on the removable disk media as the first booting. If you unclear, search in the google the similar article. Because this post just my own language write that i read from article in the ITS web. Sorry, I'm forget the web address and the author. I hope this post useful.

Publish Blog di Google

Very often, someone who has a blog want to publish. But most of them confuse when their blog wasn't appear in the search engine. The solution is as follows:

1. Open google add url.
   
2. Fill URL & Comments. Fill URL with address our blog (eg : http://masterichax.blogspot.com/). While, the commend fill with short comments about your blog. If you don't have lost connection, you will see greeting Thank You from google.
3. Then go to google webmaster tools.
4. Login using gmail account.
5. Enter address your blog, then click verify blog site.
6. Choose verification mode. Select Add meta a tag, then show the code its meta tag.
7. Copy the code meta tag.
8. Go to our blog again. Press bottom setting>Edit html.
9. Paste the code meta tag below the heads line before the body code. Note, used classical template for easy and doen't have problems.
10. After that, save and publish the template has been change ealier.
11. in the google sitemap page, click verify button.ottom.Di halaman google sitemap,klik tombol verify.In google sitemap page, click the verify.
12. Copy the two codes from the following web http://pernakpernikblog.blogspot.com/2007/01/publish-blog.html. Sori, i can't write here because error when i publish.
13. Paste the code below the head code, same like step number 8.
14. Change keyword1, keyword2, with words that describe your blog, for example: I, service, computer, internet, bloggers, and others.
15. Press save, then publish. If you see error, change the command model like in the meta verfy. And, I succeeded. Maybe my way is wrong, i don't know :). Try to more lear.!
16. Wait for more 3 day to your blog appear in the google search engine index.
    
17. Save & publish. Done. Remember, the road or steps in the top just a liitle way so that your blog entry can enter in google search engine. For more, try to read about pagerank and search engine optimazation.

If you less familiar try to read in the http://pernakpernikblog.blogspot.com/2007/01/publish-blog.html.
For the "create blog publish" author pernakpernikblog.blogspot.com minta ijinnya bos...Your post i write again. I hope you allowed. Thanks.

MP4 AX Chocolate & NEOTITAN was DIE

Case: Chocolate & NEOTITAN MP4 AX die. If connect with the charger is seem charging. But if connected fo computer not detect.

My Solustion:
Prepare the power supply (approximately price in the market Rp 150rb, -) .
Unloading/dissambel the player
Connect th power supply to dot batteries in the board player.
Try to turn on player. If the indicator at power supply show 0.01 ampere, sometime the problem in the component that has number 24.000, 24.530, or 27.000. Change it wiht the new one.
Result ? Live... :)