MP3 Player Utilities Collection

1. Mp3 Player Utilities 1.28
2. Mp3 Player Utilities 1.39
3. Mp3 Player Utilities 1.43
4. Mp3 Player Utilities 1.45
5. Mp3 Player Utilities 1.46
6. Mp3 Player Utilities 1.48
7. Mp3 Player Utilities 3.64
8. Mp3 Player Utilities 3.68
9. Mp3 Player Utilities 3.70
10. Mp3 Player Utilities 4.00
11. Mp3 Player Utilities 4.04
12. Mp3 Player Utilities 4.18
13. Mp3 Player Utilities 5.09

MP4 Agiler PFE-051 Loading

From Ad Sutanto, i received mp4 Agiler PFE 051. It's case loading. To solve this, i had done this steps :

1. I backup the firmware in the player although the firmware in corrupt condition.I do this for anticipate if I failed. I use s1clone_1.3 from http://s1mp3.de/tools.s1clone.html to backup the corrupt firmware that player. Time that need to backup firmware more less 41 minutes.

2. Because, VID &PID player show USB\VID_10D6&PID_FF66\5&3733C518&1&5 I use mp3 player utilities 4.18 that has driver for that player.

3. The firmware, I use board ID to find it. Because a lot off firmware in the outside for board QY-960V1-STLS__2007.1.xx ( i forget to write it). If you don't find that firmware, you can download here.

4. Connect your player that you will to upgrade firmware.

5. Install the driver. If the player doesn't need driver, you must upgrade the driver. Choose the driver at directory C:\Program File\Mp3 Player Utilies 4.18\Driver.

6 Run the upgrade firmware process (start>program>mp3 player utilities 4.18>mp3 upgrade tool. Then, select the firmware where you save it in the hardisk.

5. Wait until finish.

You will see your player white screen. Don't worry. May be the player has "shock therapy". Disconnect your player from the computer. Then turn on. Wait few second, you will see you player became normal and the last data still inside in the player.
Ok..I work with those steps. If you want to follow my step and use the data,

I warning you " I don't responsible if your player became abnormal or die. Because I don't ask you to follow me, but you follow me yourself.

Specification player like this :
1st bootloader : AK1025;
2nd bootloader : I don't know..forget to write it
Board : QY-960FV1-STLS_2007.1.xx
LCD : JYD__G5064__GANT20S02177A-C
USB\VID_10D6&PID_FF66\5&3733C518&1&5

Camera Toshiba Die Cause Induction

I receive Toshiba camera, Toshiba PA3649L, from the camera FCJ. It's case or condition die. Finally, the camera can live again after I done this step.
1. release of all screw to disassemble back cover camera.
2. Remove the LCD.
3. Remove shit behind LCD
4. Cover shit bottom LCD with "selotip"
5. Assembling all again
6. Complete and Live

Ok..May be you said that I'm just luck. But, you can try it if your camera die. May be the problem your camera just simple like me, i call induction for those problem.If your problem cause another thing, I' sorry. You can browsing again.

Solve Shemale By Cry & Album Bokep

I accept compaq notebook V3660TU from Pak Eko that infected by virus, i don't know virus or else, Shemale by Cry & album bokep folder. I solve this problem with this step.

Step 1: Hide directory partition except C. If you don't have partition tool you can install the software partition magic or partition you can hide the menu with the Hiren's boot cd 9.9.
Step 2 : Try to repair the windows in C partition. If you cann't repair the windows, you can format it. But, before you format C partition, don't forget unhide again another partition. After that, backup your document to the other partition (like D or E, what ever you want). In addition, don't forget backup your driver notebook then save it in cd. You can use drivermax to backup your notebook (or you can download my driver i backup it to you). After all, you hide again your hardisk partition except C. Then Restart.
Step 3 : Format the windows.
Step 4 : Install the driver with your CD that you made before and Install the program that you want.
Step 5 : If finish step 4, don't forget to install anti virus and smadav rev 6.3 to. Then, scan you computer / laptop. Make sure your directory clean from viruses.
Step 6 : Maintenance you computer. You can defrag and cleanup your c partition.
Step 7 : Deep freeze your C partition. If you do not have deep freeze software you can download here.
Step 8 : Restart the computer and laptop.
Step 9 : Unhide partition except that you hide C before
Step 10 : Run your anti virus again.

I hope now you computer is clean. If you find your computer not clean yet. You can do it again run anti virus, but in this step you must deep freeze non active system restore and make off.
After your computer clean, forget don't clean up your computer in a local user (like temporary files, etc). Then again deep freeze.
I hope this post useful for you. If any question you can post here or email me.Thanks

Sound Not Good If Use Headset at Sense SE215

Had experienced voice or sound from headset mp4 wasn't good, as is my nature? Sense SE215 owned consumer I give voice "srek-srek". But if using a loudspeaker, mp4 spent a good sound or voice.

If you find this problem, you can do what i have done.
1. Try to solder again leg slot headset.
2. If still the same, check the components near headshet slot. May be the leg not glue well. You must solder again. Make sure the component in good position.
3. If the you think component is broken, change with the new one.

Good luck.

Camera Sony W-35 "Turn Power Off and on again"

If meet this problem, you will browse to the internet how to solve this. I warning you, that a lot off suggestion for solve this problem. I ask you don't follow the way drop the camera. It can make more worst your lens if you're not lucky. Its not cheap to get the new lens. But, the decision on your. Cause the risk on you to.

How about me? How i solve this problem.
I will tell you, but you have your own risk if you follow me and don't blame me. I warning you .. if you doubt and don't have adequate tools don't try this..

My way:
1. Disassemble the camera. Put off all screw at outside the camera case.
2. Put off the connector, flexible wire, in the small board inside the camera. Until you get the lens.
3. Clean your lens. You can use contact cleaner lubricant for service to spray at motor.
4. After that, clean up all of the lens. It's purpose to prevent short electricity.
5. Assemble your camera again.
6. Try it! Until I finish this step.
If you don't finish until this step. Maybe your bike is broken so worst. Change the motor and its connection with the good one. Then assemble again. I hope you can solve your problem.
Thanks.

Samsung YP-T9ABD "Full Charge"

Have You experience with case "mp3 samsung YP-T9ABD doesn't want live? But, when connect to a computer "Full Battery Charge"?

Did you know what the problem cause that? If you said battery problematic, your answer is correct.

To handle this problem take to service center! But the cost is expensive. Cost to replace the battery and service is Rp 160,000, -.

Is any cheaper solutions? If lucky, we can get the cheaper solution. The cost less than Rp 80.000,-.How?

1. Open the behind case with take off 4 srew.
2. Detached the battery connector.
3. Cut the line wire for connected with the wire of the new battery cable. There are other solutions to more cleanly. Detached lock on the cable connector. Unplug the cord, replace the cable with a new battery. However, remember! Caution penguncinya and do not plug up lost. It's difficult to find another one. Hence, in order to reduce the risk, chose alternative with cut the wire, then connect with the new cable battery. I found battery with the same size in the Mp5 player.
4. Put it on again battery connector in his place.
5. Then close back the casing, do not forget 4 screw.
6. Finish

Brica DigiArt Z-835 Trouble, Be Careful

I have received camera digital. Brand of camera, Brica Digiart Z-835.
The camera has a problem with its lens. So, the image over bright or white.
The specific problem those camera is the flexible in the lens. These flexible connect to diaphragm that set up incoming light.
The flexible in the camera Brica DigiArt Z-835 is so easy to broke cause the progressive lens. If you want jumper that flexible is very difficult because the channel in the lens enough narrow. Anda, I thing easy to brake again.
The solution these problem only change the flexible tire or change with the new one. And its not cheap.
So...if you want to buy digital camera with brand Brica DigiArt Z-835 be careful. You must ready to find problem with your lens.
I hope this post useful for you before you buy a camera or you want to service it.
Thanks.

MP4 Star 1 GB Die...

I accept the MP4, with

Specification :

• Brand = Star
• Capacity = 1GB capacity.
• 1st = RK2606A bootloader (i think);
• 2nd bootloader = hynix
• Board CR001A_V1.0 = 20060922

Case : MP4 die.
If linked to the computer, the player is requested driver.
If measured with power supply that ampere indicator showed 0:04 ampere.

Hypothesis : software problem.

What i have done to fix that player :

1. Install firmware update 3.1.20
2. Download firmware from s1fw.com. You won't find firmware exactly with your board ID. Use that firmware that similar with your player. You can try with firmware that I had download from s1fw.com. Use the series (1, 2, 3, 4)!!!
3. Run the program. Use first firmware. If fail, you can use the next firmware (2,3, & 4)
4. I successful with the first firmware. I hope you too.

Thanks.