Brica DigiArt Z-835 Trouble, Be Careful

I have received camera digital. Brand of camera, Brica Digiart Z-835.
The camera has a problem with its lens. So, the image over bright or white.
The specific problem those camera is the flexible in the lens. These flexible connect to diaphragm that set up incoming light.
The flexible in the camera Brica DigiArt Z-835 is so easy to broke cause the progressive lens. If you want jumper that flexible is very difficult because the channel in the lens enough narrow. Anda, I thing easy to brake again.
The solution these problem only change the flexible tire or change with the new one. And its not cheap.
So...if you want to buy digital camera with brand Brica DigiArt Z-835 be careful. You must ready to find problem with your lens.
I hope this post useful for you before you buy a camera or you want to service it.
Thanks.

MP4 Star 1 GB Die...

I accept the MP4, with

Specification :

• Brand = Star
• Capacity = 1GB capacity.
• 1st = RK2606A bootloader (i think);
• 2nd bootloader = hynix
• Board CR001A_V1.0 = 20060922

Case : MP4 die.
If linked to the computer, the player is requested driver.
If measured with power supply that ampere indicator showed 0:04 ampere.

Hypothesis : software problem.

What i have done to fix that player :

1. Install firmware update 3.1.20
2. Download firmware from s1fw.com. You won't find firmware exactly with your board ID. Use that firmware that similar with your player. You can try with firmware that I had download from s1fw.com. Use the series (1, 2, 3, 4)!!!
3. Run the program. Use first firmware. If fail, you can use the next firmware (2,3, & 4)
4. I successful with the first firmware. I hope you too.

Thanks.

Modem Sierra AirCard 881U "Searching"

Do you have modem sierra 881U just "searching"? And, you want to fix it by yiurself? If so try these steps. Remember you have your own risk. And this solution only firmware problem signals indicator full visible) and not hardware problem.

The Step...

• Download the firmware. When I made this post, this firmware is latest version.
• Remove your sim card before update firmware.
• Make sure the battery condition of full power (if you use a laptop) to prevent the update firmware process stop the road. If it happen perhaps can make your modem destruct or die. But, my i never meet it. The modem just back to the original position (searching).
• Insert the Sierra Wireless 881 and ensure AT&T Communication Manager or Sierra Watcher are not running.
• Run or Double click on AC881U_F1_2_3_15ap.exe provided above.
• Do NOT interrupt or eject the your modem while the the firmware is being installed! The upgrade may take up to 10 minutes. Wait until the firmware update process finish or complete then click ok.
• Sign out
• Enter your card in the modem
• Connect your moden to the computer,
• Finish. How the result?

If the display at 3G watcher like this. The modem had a hardware problem. Solution for this shake IC PA. But I warning you, if you don't have experience & tool so support that..Don't try this. Remember, you have your own risk.

for another trouble you can visit here or
For the picture troubleshooting you can visit here.

Motherboard Gigabyte GA-7VA (Rev 2.x) in Trouble, Die?

Have you experienced with dead computer? I means dead is computer life but doesn't want in windows? If not, you need to read this posting about my experience with my computer.Who knows tomorrow day beneficial for you, if you plug with same problem.

Story like this. A gigabyte motherboard has a different characteristic from most motherboard. The difference is in the sound beep. Generally, the other motherboard made a sound long beep onetime if the motherboard normal. However, gigabyte socket a motherboard does not ring.

Normally, motherboard will make sound long beep once if we don't install ram. By installing ram, we will hear length beep once and short beep twice. If the ring does not appear, maybe your motherboard or ram have problems. Try to replace the ram with the other one. If it does not ring length beep once and short beep twice, you have trouble with your motherboard problems. It can be the motherboard or processor overhead. Processor overhead caused the processor fan does not function optimally. Normally the temperature cannot more than 40 Celsius. If you find the temperature reach 71 Celsius maybe your processor in trouble.Replace it. If not completed, the solution is to change the processor.

I hope this post useful for you.

Price List Camera, Modem, & Notebook

to friends forum :
If you need pricelist;
1. Camera, battery, & accesories
2. Modem
3. Notebook
You can download it. Please click in the item (1 = pricelist camera; 2 = pricelist modem, so on)

Use always this post to get the latest update. I' m sorry not routine visit forum.Thanks.

FAQ

Announcements.

Accordingly the number of questions several times a contact from my friends from out of town (outside Jogja), both stores and individuals, asking if the receiving service.
Then there are some people who live in jogjakarta and surrounding areas come directly to my home - I'm sorry that you must come up time and time again because do not meet me -
So I make this announcement, related questions that often arise.

Q: Receive service MPX / Camera / etc?
A: Accept. Not as long as a large electronic-large. I'm not interested whit those thing, lazy. I had just fixing until this time - from most of the few - MPX player, camera, laptop/notebook, & modem. I received flash disk 3 times and failed. Same wtih tv tuner, twice and failed.

Q: Can fixing MPX / Camera / and others?
A: I can not say, I can before try it. There is never a certainty before the first try. In addition, there are some factors that always accompany in each service. And, I do not close the possibility of requesting assistance with my friends (Valet service handphone - Ari object phone, Topig Graha Nokia, Valet service watch-Mas Wondo - thank for your enlightenment-; Sanur: thank assisted the sparepart) and of course God YME on inspiration and luck give to me.

Q: How much cost of service?
A: Fee .. Mpx Player less than Rp 50.000; camera less than Rp 300.000; modem less than 100.000,- I will not confirm previously. If cost more than that, I will confirm to you to get an agreement.
Q: How many days to finish it?
A: Please, estimated own. Because each item has a difficulty level, how manya previous entry. For consideration: my principles work are as follows:

1. I will try to complete case-by-case based on the order of entry first.
2. If the distress, I will continue with the new cases, while waiting for the enlightenment of cases not yet resolved. Until I finally declares myself up. My plan make a list of service incoming (include; process, successful / or not) reduced the list of goods that have been taken by the owner / represent can store / person)
3. Outside my time, there are at least 2 weeks for items that I need to be sent to Jakarta.
   

Q : I am from out of town, can I service to you?
A : You can. But, I don't want promise will be 100% fixed. Because, I still have obstacles such as: sparepart and software. I'm not a service center that have a backup from official distributor. And, the cost to bring back to you is responsibility. I will use the tiki JNE or other shipping, such as 21. In addition, the burden the sender of goods.

Q: Which your address?
A: My address listed at the top of the blog.

Q: How many hours open store?
A: I do not have stores. So, for friends from jogja surrounding that directly to my place, please make appointment before. Phone to my flexy (listed at the top of the blog). If not my handphone not active, sms me!. As soon as possible I will reply. And, for my activity daily i will write at twitter.com a / n ichaxs

Thank you

MPX ALLTRONIX (AX)

MP4 Alltronix (AX) Salsa Pro
I received mp4 from Fitara Computer, Ramai Mall. It's case : hour glass and restart again. So on. It's can be enter the menu.

Steps that I have done :

1. Check with the power supply. The result the ampere needle up >down>up so on, alive than are dead themselves, living longer. My hypothesis, firmware problem. But I don't want to upgrade the firmware first. Although easy, the risk is very high.
2. Than, I re solder reset IC memory / 2nd bootloader and switch on-off with hope not firmware damaged. The result, still the same. Player is still up> hour glass> restart so on.
3. I try to re solder its ic flash (1st bootloader). And the results, taaaaa ta . Successfully and prepared & delivered goods to the owner

Description Player:
Name of player: MP4 ax Salsa Pro
Board:BKS970009V3
1st bootloader: ATJ2097H
For you that have problem with your firmware I have it..But the risk is borne by the passenger:)
Download the firmware MPX-ax Salsa Pro ATJ2097H_BKS97009V3

MP5 Conga (AFE054G51)
Spesification :

• 1st bootloader = Anyka;
• 2nd bootloader = SAMSUNG 716_K9G8G08U0M_PCBO;
• Board = KGMP888-GAME-AK-V3.1_2007-05-10
• Code Distribution : S0705012EWGA01SH1G01
  

QY-881FV2_2007.02.03_ATJ2091N Loading & White Screen

Specification MP4 :
Board : QY-881FV2
2007.02.03
1st bootloader : ATJ2091N
2nd Bootloader : Samsung
LCD : TFT60005ACT6-BLA 07/3/8
USB\VID_10D6&PID_FF66\5&16F06087&11&1
Case : Restart
Solution : Trim back all electricity. Re solder again switch on-off and 2nd boot loader. Cleanup the board with IPA or something like that. Than see the result. If the player became loading, I am sorry, i think you have a problem. Because firmware in the s1fw.com not match with your player. I had try those fimrware and the result white screen.